Recento Pro · Troubleshooting

AlDente Not Working on macOS 27? Here Is What Is Actually Happening

Your charge limit is not broken, and updating AlDente only gets you partway there. macOS 27 runs a battery calibration cycle every few days that overrides every charge limiter on the Mac, Apple's own native one included.

By Ram Velmurugan · Founder & Lead Developer, 1dot.ai

Published Nov 15, 2026·GitHub issues and Apple's support page checked live Nov 15, 2026·10 min read
Quick answer: AlDente's own maintainers, in GitHub issue #1846, say macOS 27 Golden Gate runs an automatic battery calibration when the system's resting-battery measurement has not updated in about three days. That calibration forces a charge to 100% and overrides every charge limiter while it runs, including Apple's own System Settings Charge Limit, not just AlDente. Update AlDente to 1.40.1 or later so it discharges back down correctly afterward, and expect the behavior to recur every few days rather than disappear for good.

Editorial note: 1dot.ai makes Recento Pro, whose Battery module has this exact limitation on macOS 27, explained honestly further down this guide. Every GitHub issue number, release version, and Apple support-document detail cited here was checked live on November 15, 2026, directly against AppHouseKitchen's own repository and Apple's own support page, not a secondhand summary.

What AlDente Users Are Seeing

Since macOS 27 "Golden Gate" shipped, a steady stream of AlDente Pro users have reported the same thing: a charge limit is set, say 80%, and the Mac keeps charging straight past it to 100% anyway. Some see it happen once and settle down. Others see it return every few days, as if the limit were simply being ignored.

It is easy to assume this is an AlDente bug, and a handful of the rough edges around it are. But the core behavior turns out to be something Apple built into macOS itself, and it affects more than one app.

The Real Cause: macOS's Own Battery Calibration

AlDente's maintainers have been tracking this directly on GitHub since late September 2026. The main thread, issue #1846 ("macOS battery calibration overrides the charge limit", opened October 7), has stayed open and pinned since, with a maintainer status update on October 21 and user reports still landing as recently as November 14. Their explanation is specific: Apple introduced new battery firmware and an automatic calibration routine tied to a value they call DOD0, the battery's resting-charge measurement. When that measurement has not updated in roughly three days, macOS requests a full charge to 100% to recalibrate it, and while that request is active, it overrides every charge limiter running on the Mac, not only AlDente's.

Two details in that thread matter for anyone trying to diagnose their own Mac. First, this reportedly happens on Macs with no third-party charge-limit app installed at all, which rules out AlDente as the trigger. One user filed the same repeated calibration against macOS 26.6.2 (issue #1833), so it may not be strictly a macOS 27 problem. Second, some replaced batteries never update that resting-charge measurement on their own, so the calibration can keep recurring every few days instead of settling down after one cycle. Apple has not published its own explanation of this behavior beyond what its support document says about occasional full charges, covered below.

The earliest report we found that matches this symptom is issue #1840("Al Dente does not respect charging limits with 1.39.4 on Golden Gate"), opened September 29 on macOS 27.0.1 and still open and pinned. Issues #1833, #1837, #1842, and #1845 were closed as duplicates of #1846 on October 7, once the maintainers connected them.

How many reports, and when

On November 15, 2026 we searched AlDente's issue tracker for issues mentioning "calibration" created since September 1, 2026. The search returned 26. Of the 25 on the first results page, 13 were still open and 12 closed. We read each title and counted eight that describe the macOS calibration overriding a set limit or dragging AlDente's own Calibration Mode along with it: #1833, #1837, #1840, #1842, #1845, #1846, #1848, and #1850. Their issue numbers sit between #1835 (opened September 23) and #1850 (opened October 13), so all eight landed in the three weeks after macOS 27 reached users. The rest are side effects (Calibration Mode starting on its own, Sailing Mode, display sleep) or older bugs that 1.39.2 fixed.

What AlDente Has Shipped So Far

AlDente cannot stop or skip a macOS-triggered calibration, but it has worked through several rough edges in how it responds to one. Version 1.39 (September 8, 2026) rebuilt its charge control specifically for macOS 27 and started detecting Apple's own calibration events. The point releases that followed through September fixed smaller issues: 1.39.2 a charge limit that did not work on some Intel MacBooks, and 1.39.3 and 1.39.4 how Calibration Mode behaved, including when macOS triggered it. Version 1.40 (October 24) went further, simplifying Calibration Mode and adding an "After macOS Calibration" setting that lets you choose between discharging back to your limit automatically or letting AlDente run its own full calibration afterward. Version 1.40.1 (October 29) fixed a case where that discharge phase could stall partway through.

Even with all of that, issues #1840, #1848, #1850, #1859, and #1870 were all still open as of November 15, 2026, each describing a different angle on the same underlying calibration override: Calibration Mode auto-starting without a prompt (#1850, #1870), AlDente holding off charging at 9% battery on 1.40 until the app is quit (#1859), and the limit simply not holding during a calibration window (#1840, #1848). None of them describe a fix for the calibration itself, because none is possible from AlDente's side.

Apple's Native Charge Limit Has the Same Gap

macOS Tahoe 26.4 (released March 24, 2026) added Apple's own Charge Limit, no third-party app required. It lives in System Settings, Battery, behind the info button next to "Charging", with a choice of limits from 80% to 100%, and the battery menu shows "Charged to [%] Limit" once it kicks in. It needs an Apple silicon Mac. Intel Macs do not get it at all, and they cannot run macOS 27 either, so the calibration problem in this guide is an Apple silicon problem.

Apple's own support document for the feature (support.apple.com/102338) says the Mac will occasionally charge to 100% anyway, "to maintain accurate battery state-of-charge estimates." That is Apple, in its own words, describing the same calibration behavior AlDente's maintainers are tracking on GitHub. Apple's native limiter is not a workaround for the calibration override. It is subject to the same one.

Where Recento Battery Stands

We make Recento Pro, and its Battery module has run into the identical wall. On macOS 27, Recento Battery no longer holds its own limit. It shows that the charge limit is handled by macOS and opens System Settings, Battery, Charge Limit for you. We are not alone in that choice. The open-source batt made the same switch, and its maintainer wrote on November 9 that on macOS 27 it "uses apple's native charge controls instead of manual controls like before," so Apple's calibration applies to it too. AlDente says it rebuilt its charge control for macOS 27 but does not document how, and the calibration overrides it either way. That hand-off inherits the same calibration override described above, because it is relying on the same native feature.

What still works in Recento Battery on macOS 27 is everything that does not depend on holding a charge: Discharge, which can bring the battery back down to your limit once a calibration cycle finishes, on Apple silicon Macs; health, cycle count, and temperature tracking. Heat Protection, which pauses charging when the battery is hot, does not work on macOS 27, because pausing a charge needs the control the hand-off gives up. We are not pitching any of that as a fix for the calibration override, because nothing currently is. It is a real, narrower kind of useful, not a cure.

Comparing Your Options

ToolRequiresHolds a limit day to daySurvives a macOS calibration cycle
AlDente Pro 1.40.1+Apple silicon or Intel, macOS 12 Monterey or laterYesNo, but discharges back down afterward
Apple's native Charge LimitApple silicon, macOS Tahoe 26.4 or laterYesNo
Recento BatteryApple silicon or Intel, macOS 14 Sonoma or laterOn macOS 27, only by handing off to the native limitNo, same hand-off, same override

What to Actually Do

  1. Update AlDente to 1.40.1 or later, so the post-calibration discharge works the way it is supposed to instead of leaving the battery lower than your limit.
  2. If you have an Apple silicon Mac on macOS Tahoe 26.4 or later, turn on the native Charge Limit in System Settings, Battery, and turn off Optimized Battery Charging so the two do not fight over the same charging hardware.
  3. Expect the battery to sit at 100% for a few hours every few days while a calibration cycle runs. That is documented, deliberate macOS behavior, not a setting that failed.
  4. Avoid editing com.apple.powerd.batterygauging.plist directly. Reports in issue #1840 say this only resets the roughly three-day timer rather than turning calibration off, and it is not something AlDente's own maintainers recommend doing.
Honest status
There is currently no setting, in AlDente, in Recento Battery, or in macOS itself, that stops this calibration from overriding a charge limit while it runs. The useful move is managing around it, not fighting it.

Sources & Further Reading

The main tracking issue, with the maintainers' root-cause explanation: GitHub, AppHouseKitchen/AlDente-Charge-Limiter issue #1846.

The earliest matching report, including the maintainer's test of deleting the calibration plist: issue #1840.

The batt maintainer on switching to Apple's native charge controls in macOS 27: charlie0129/batt issue #177.

AlDente's own release notes: GitHub releases for AlDente-Charge-Limiter.

Apple's documentation of Charge Limit and Optimized Battery Charging: Apple Support, "About Optimized Battery Charging and Charge Limit on Mac".

Recento Battery's own documented macOS 27 behavior: Recento Battery requirements and FAQ.

Frequently Asked Questions

Why does my Mac keep charging past the AlDente limit on macOS 27?
Most reports trace back to a macOS battery calibration cycle, not a broken limit setting. AlDente's own maintainers, tracking this in GitHub issue #1846, say macOS forces a charge to 100% when the system's internal resting-battery measurement has not updated in roughly three days, and that forced charge overrides every charge limiter running at the time, third-party or Apple's own.
Is this an AlDente bug?
Not at its root. AlDente rebuilt its charge control for macOS 27 starting with version 1.39 (September 8, 2026) and has shipped several follow-up fixes since, but the maintainers are explicit in issue #1846 that the calibration itself is macOS behavior they cannot stop or skip. Some of the confusion around it, like Calibration Mode auto-starting without asking (issue #1850) or discharging further than expected afterward, are AlDente-side rough edges on top of a macOS-side cause.
Will updating to AlDente 1.40.1 fix it?
It will not stop the calibration, but it is still worth doing. AlDente 1.40 (October 24, 2026) added an "After macOS Calibration" setting that lets you choose between discharging back to your limit automatically or letting AlDente run its own calibration afterward, and 1.40.1 (October 29, 2026) fixed a case where that discharge phase could stall. Before 1.40, the app could leave you sitting at a lower charge than you wanted once a macOS calibration finished.
Does Apple's own native Charge Limit avoid this problem?
No. Apple's support document for Charge Limit (support.apple.com/102338) says the Mac "will occasionally charge to 100% to maintain accurate battery state-of-charge estimates," which is Apple describing the same calibration behavior on its own feature. Apple's Charge Limit also needs an Apple silicon Mac running macOS Tahoe 26.4 or later, so Intel Macs and anything on an earlier macOS cannot use it at all and depend entirely on a third-party app.
How often does the calibration happen?
AlDente's maintainers say macOS requests one when its resting-battery measurement has gone unchanged for about three days, which happens on original batteries too, not only replaced ones. On some replaced batteries, that measurement reportedly never updates on its own, so the calibration keeps recurring every few days rather than settling down.
Does Recento Battery have the same problem?
Yes, for the same reason, and we would rather say so than let a reader assume otherwise. On macOS 27, Recento Battery does not hold its own charge limit. It hands the job to Apple's native Charge Limit, and that native limit is just as exposed to the calibration override described above. Where Recento Battery still helps on macOS 27 is Discharge, which can bring the battery back down to your limit once a calibration cycle finishes, and its health, cycle count, and temperature tracking, none of which the calibration affects. Heat Protection does not work on macOS 27, because pausing a charge needs the same control the hand-off gives up.
Can I stop or skip the macOS calibration myself?
Only with workarounds AlDente's own maintainers say they do not officially recommend, like deleting or moving the system file that tracks the calibration state (`com.apple.powerd.batterygauging.plist`). Reports in issue #1840 say this only resets the roughly three-day timer rather than turning calibration off, and editing a system battery file is not something to do routinely.

The Bottom Line

Your AlDente charge limit is not malfunctioning on its own. macOS 27 runs a battery calibration cycle every few days that overrides every charge limiter on the Mac while it runs, Apple's own native Charge Limit and Recento Battery's hand-off to it included. Update AlDente to 1.40.1 or later, turn on the native limit if your Mac supports it, and treat the occasional full charge as macOS doing exactly what Apple's own support document says it will do.


Looking after your MacBook's battery beyond the charge limit itself? See what Recento Battery tracks for health, cycles, and temperature, browse every 1dot.ai guide, or see the full module list on the Recento Pro product page.

Track Your Battery's Health, Not Just Its Limit

Recento Battery shows capacity, cycle count, and temperature over time, and can discharge a Mac back to your limit after a calibration cycle finishes. Health tracking is free. Recento Pro adds Discharge, Heat Protection (macOS 26 and earlier), and Sailing Mode.

See Recento BatteryRead More Guides